I’ll drop by one of these days. You’re about 30 miles away.I have been dying to find a local rider to hang with. Tomorrow I’m doing my Arnott air suspension install at my shop on a day off. Would be a perfect hang out.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I’ll drop by one of these days. You’re about 30 miles away.I have been dying to find a local rider to hang with. Tomorrow I’m doing my Arnott air suspension install at my shop on a day off. Would be a perfect hang out.
That would be wonderful! Give me a heads up I’ll make sure I ride to work that day!I’ll drop by one of these days. You’re about 30 miles away.
I tried 50's and 25's for a week and settled on the 25's. The "only fit one way" was common to both sets..... took me a bit to work it out also!Installed the 25mm riser extensions from Wunderlich with the 30mm longer lines ....
Makes a big difference to me .... one thing to note when fitting is that they only fit flush one way round - I fitted one side and it was perfect but the other had a gap to the riser ... after much head scratching I turned the extension round and it was perfect. Looking at them off the bike I thought they were the same.
I thought the wunderlich where different… are you sure they are wunderlich? Look nice. Link pleaseInstalled the 25mm riser extensions from Wunderlich with the 30mm longer lines ....
Makes a big difference to me .... one thing to note when fitting is that they only fit flush one way round - I fitted one side and it was perfect but the other had a gap to the riser ... after much head scratching I turned the extension round and it was perfect. Looking at them off the bike I thought they were the same.
View attachment 13652
View attachment 13653
Dooooh .... you are right they are from HornigI thought the wunderlich where different… are you sure they are wunderlich? Look nice. Link please
Very cool. I have the Wunderlich grip sleeves and they are really nice. My only complaint is that I have lost a bit of the grip now. Maybe because my gloves are made out of dear skin and they can be a bit slippery. Other than that, I am really pleased with the sleeves.
As a bonus, I got a good look at how to remove the exhaust servo motors. Didn't know that one bolt holds both servos in place. Thought I would have to take 3 bolts out on each side. What I don't know is how to buy the exhaust servo eliminators. Are all servo motors alike in an electrical sense?Okay everyone! The pro race install vid is posted! Please make your way to the video! Any comments or suggestions are welcome.
There are some on Revzilla called servo buddy I believe. The ones in my video came with my kit.As a bonus, I got a good look at how to remove the exhaust servo motors. Didn't know that one bolt holds both servos in place. Thought I would have to take 3 bolts out on each side. What I don't know is how to buy the exhaust servo eliminators. Are all servo motors alike in an electrical sense
Wow, I really like this mod. I will check my end caps now and see how they attach to the baffles. Thank you for sharingTurned the exhaust endcaps 90 degrees and painted the inside black.View attachment 13863
Post a side view picture...Turned the exhaust endcaps 90 degrees and painted the inside black.View attachment 13863
the under fender lighting is cool idea. Would you share a photo from a night ride, or with the garage lights out or something please?I did things…. I couldn’t get a walk around video uploaded so I’m attaching a picture until I do. Cause I need to post the vid of the pro race install also.