INNOVV K5 Motorcycle camera system dual channel DASHCAM MotoCam

[iamtheJwalker]

I see posts for the K3. Has anyone installed the INNOVV K5 camera system? I am thinking it should work better. Because there is no control box to hide.

It is either this, two GoPros, or maybe the Techalogic DC-1.

Cheers

William

​

 

[Puck]

I was just looking for a dual channel system. Would also like to hear opinions.

Oof. Just saw price on that one. I was leaning more towards something like this

VSYSTO D6WL Motorcycle Dash Camera No Screen Safe Driving 130°Wide Angle IP67 Waterproof Dual Motor Drive Recorder 1080P Support Max 256GB G-Sensor WDR Loop Recording WiFi https://a.co/d/c8Jinur

 

[XUMERX]

I'm very interested in installing cameras too... I just can't seem to bite the bullet on it due to the lack of reviews.

 

[MikeB]

I don't need 4k so I installed the Viofo MT1 with 256GB for $205 when it was on sale @ BlackBoxMyCar couple weeks ago and very happy with it.
Note: The front camera has yellow flickering are from clearwater yellow lens.

 

[XUMERX]

I don't need 4k so I installed the Viofo MT1 with 256GB for $205 when it was on sale @ BlackBoxMyCar couple weeks ago and very happy with it.
Note: The front camera has yellow flickering are from clearwater yellow lens.

Not bad at all…. I would like 4k tho.

 

[iamtheJwalker]

I don't need 4k so I installed the Viofo MT1 with 256GB for $205 when it was on sale @ BlackBoxMyCar couple weeks ago and very happy with it.
Note: The front camera has yellow flickering are from clearwater yellow lens.

The Viofo MT1 has a box to hide. How did you install it and the cameras?

 

[MikeB]

The Viofo MT1 has a box to hide. How did you install it and the cameras?

I placed the box and all connections under the seat of the Bagger.

Positive and Negative to the battery and the Blue ACC connector tab into Clearwater/Billie Canopener brake light which I already installed prior (you can trace and tab in positive brake light),

I mounted the front camera on to the small fairing piece (Bagger/TC) under the headlight and the rear camera mount to the rear trunk rack.
The wifi and snapshot tabs mount on the left handlebar.
I use one screw method with washers and Loctite for each camera mount for easier to align it straight and less holes to drill.

I set 2minutes recoding, 230MB file size for each front or rear camera and the wireless download took about 40 seconds for each file.

 

[iamtheJwalker]

I placed the box and all connections under the seat of the Bagger.

Positive and Negative to the battery and the Blue ACC connector tab into Clearwater/Billie Canopener brake light which I already installed prior (you can trace and tab in positive brake light),

I mounted the front camera on to the small fairing piece (Bagger/TC) under the headlight and the rear camera mount to the rear trunk rack.
The wifi and snapshot tabs mount on the left handlebar.
I use one screw method with washers and Loctite for each camera mount for easier to align it straight and less holes to drill.

I set 2minutes recoding, 230MB file size for each front or rear camera and the wireless download took about 40 seconds for each file.

Thanks, very nice

 

[Wayners]

I also like dual channel and use a Mercylion dashcam. Easy to fit ,great picture quality and build quality.
The loop recording and parking monitor features provide continuous surveillance and peace of mind.

View attachment _L5A6663.JPG