Lost fasteners

[Boritch]

Hi guys. I'm posting for help with these part numbers. I went to max bmw dot com but couldn't figure it out.

Riding home from work I noticed that the bolt (nut and washer too) were missing on the front brake line where it couples to the L shaped bracket near the speedometer. Here is a picture of the same bolt on the clutch side. Thank you in advance if you are able to help me out.

 

[BER18 100]

I have had good luck at Ace Hardware finding a metric bolt to match a BMW fastener.
The stainless steel bolts are expensive but look good. There is considerable variety.

 

[Noelpolar]

The bike's previous owner has installed 50mm bar risers.... these look like the ones that come with the kit that includes the L brackets to relocate the line joiner blocks from under the top tree etc.... so the fastners are not BMW parts as such....

 

[Boritch]

I had no idea my brake and clutch lines had been relocated from the original position. I did by the bike certified pre-owned. Thanks for this insight.

 

[Noelpolar]

I had no idea my brake and clutch lines had been relocated from the original position. I did by the bike certified pre-owned. Thanks for this insight.

View attachment 17186

No worries.... fwiw after trying some risers I settled on 25mm ones and then got 25mm longer lines and remounted the blocks back under. I may still have the screws and will have a look today.

 

[Boritch]

Copy That....fwiw I'm going to return it to stock and see if I like that ride position while moving the blocks back under.

 

[Keehn]

I know this doesn't help in bolt locating, but when you do source your needed nuts/bolts, use blue Locktite to secure them.

Our bikes vibrate...a LOT, and Locktite goes a LONG way in reducing/eliminating nuts/bolts falling off as we ride.

Mike