Kickstand_Down
Active member
So, finally got the weather/time to start the process of installing the FP slip-ons in the R18B. Everything was going relatively smoothly until it came to lining the stock heat shields back up and bolting them down. Basically, the angle of the provided mid-pipe doesn't seem to have a position in the wiggle room provided to line the heat shield from the muffler to the cat side heatshield. I decided to put it down for the evening and revisit tomorrow, but does anyone who has install it have some insight on maybe whether the mid pipe needs to angle up, out or somewhere in between?
Unfortunately, it looks like FPE sort of phoned it in on the directions. All of the pictures are basically shown on a pure/classic, and they're terrible resolution/way too zoomed in to see any context to position things. Any insight would be appreciated! I'll take some pics tomorrow when I get back at it to show what seems to be the problem.
Unfortunately, it looks like FPE sort of phoned it in on the directions. All of the pictures are basically shown on a pure/classic, and they're terrible resolution/way too zoomed in to see any context to position things. Any insight would be appreciated! I'll take some pics tomorrow when I get back at it to show what seems to be the problem.