33Cruzr
Active member
Another note: The inner wall of the fish tip is solidly welded to the outer wall. This can come apart by grinding about 1/8” along the edges. Keep in mind that the inner is in two pieces. The oval tube w holes is not welded in to slide back and forth w heat. The SS wool is tacked on and break w a good yank. I can’t speak for the front end. There is an earlier video by someone else that can look at.If you plan to cut open the fishtails, gut them, then put them back together to keep the original look. You may want to check out the attached cut-up fish tip.