Search results

I took the case off of my iPhone, and the thing is, I don’t miss it.

The clutch fluid IS blue. I just blead my clutch line when I installed new handle bars and the fluid I bled was blue.

Those are covers :-|

What did you use to tint them? I don’t have my lights yet so I’m assuming I can take the light bezel off to apply the tint.

I haven’t had any drops on the floor since I took it in. But I’ll never get all the oil and dirt that it picked up out of the bottom of the bike.

I”ve not seen this posted, but I stumbled upon this the other day. Wiki workshop repair manual for the BMW R18 – repair maintenance service workshop manual

I’ve had weird key fob not found issues due to a fault main battery.

I just put on a set of Commander III’s in my bagger and noticed the front tire likes to sing just like the Michelins on RT.

This has been my experience.

It’s possible that one of the connectors at the grip is disconnected.

I’ll install the aux driving lights onto my bagger as soon as the parts arrive, which seems to be about a four-week lead time on the items that need to come from Germany. I want the lights to be amber, so do you have any experience tinting these aux lights? If so, can you share what you used? Or...

I’ve had that happen on my 2017 R1200RT. But it’s a 2017 so I just figured the battries were getting low. I replaced both… BTW, something like the GS911 scan tool will tell you what’s going on and in the case of my RT, it said something like sensor interferience.

How much were they before the price hike?

My ‘22 1st edition just after a bath this weekend. I then proceded to ride through a giant cloud of gnats. :-|

I rode the bike for about four hours between yesterday and today, and I like the bars. I have them, so my arms are basically straight out with a slight bend in the elbow, and it just feels perfect. What I also noticed is that it allows you to counter-steer easier, and it just feels like a more...

Lots of work on the bagger over the last week. New tires front and back, Helibar luggage bars installed, and I just finished installing the Helibar tour commander bars. It’s not a complicated installation, just tedious. Now, out to go for a ride!

I have a good supply of grommets from some other projects and installed them behind the light. The batwing fairing has a pin that goes through the lower holes on the headlight assembly and the grommets. The light is now solid. I’m curious to know if similar grommets should have been there in the...

All I did, just like any other wheel removal was to remove the two bolts holding the caliper and set it aside. If it was from inside the caliper it would mean that it was assembled wrong at the factory. Once again, thanks for checking. You went above and beyond 🙃

As I’m putting the front back together after installing the Helibar tour commander handle bars, I noticed that the two hottom holes that I mention in my video are the lower guide pin holes for the bat fairing.

They shoved grommets behind the light? I can’t see anything that is broken, it seems to me to be an issue of those lower mounting grommets being too loose or like they are two small for their mounting holes.