Search results

Very well made bars in black. Used but never dropped. I would rate the condition as mint. HeliBars make top notch products. I also have their handlebars with are awesome. If you have the Kern-Stabi lift, more than likely you would have to modify the lift handle to clear the bars. These were...

Calling it fixed. Voltage stable, no error messages. (y)

Hopefully this was it. My YouTube short

This is what AI says when I asked if an over voltage error can be generated from a loose battery connection. Apparently it “remembered’ that I also have a R1200RT. I didn’t say anything about the model in my question. Yes, you can get an over-voltage fault from a loose battery...

There are over voltage fault codes on multiple systems, ABS, distance control, and others. I also notice the voltage fluctuating as shown on the dash when riding. I’m pretty sure that it’s normally a pretty steady voltage reading on the dash. Take a peek at your voltage display when you get a...

R18B This error has been popping up over the last few rides. Today, there were times when I would clear it an it would pop right back up. And today, along with that error was a distance something error. There were so many today that one of them finally threw a fault code that was saved. A quick...

My dash has been apart at least four times. When I changed out the handle bars, when I first took it in to look at why the headlight was point up to high (missing grommets), to do the head lamp recall and my checking out something else. After I got it back from the headlight recall, my dash...

I have the same helmet and built-in intercom. Had it for a couple of years. The only thing that bugs me about the NT3 is the forehead line will pull out as you take your helmet off if it’s hot and sticky out. I learned to keep my thumb there when I take the helmet off.

Let’s see it

That’s a possibility. I suspect it was something electrical like a weak battery. My fuse contacts don’t look great, so I cleaned them and shot some contact cleaner in the socket.

I started getting this message on my R18B. Did a fault scan and there are zero faults detected my the GS911. :-|

I’ve had a few back fires as well since the update. But I also re-loaded the BT Moto tune…

I’m short .10 of a version :-O

Just had the recall done and my software version went from 011_007_035 to 014_015_020 which is quite a jump. Has anyone noticed any changes to any of the bikes functionality? Any screen changes, icon changes, etc?

Location is in his post

No idea if this is legit https://www.etsy.com/ca/listing/1647394419/wiring-diagram-for-bmw-r18-2020-2021

I found a source on ebay for these screws, including the difficult to find M5x17 screw with shoulder. Seller name is Motors*offical*store Below is a screen shot of one of my purchases.

After wasting some $ on “squirt bottles” that turned out to be a bigger PIA than necessary, I found someting that works really well for filling up your transmission and final drive. This extraction tool works as an fluid insertion tool as well. The filler hose comes in two sizes so there is no...

I use the Optimate 4 which has a canbus program. It works fine plugged into either power port.

I only used it once to change tires with the bike on the lift—that’s the only reason I bought it. I do lift it from the rear first. It’s not a major issue; I should be able to fixi it, but it still looks to me like it could have been made a little stronger.