Search results

Scott, does this mean you will do the bobber and the R18B or just the bobber?

Was not aware of that setting, first time seeing it. Was weird every time it would give a alternate road to go, it would display a small icon of a motorcycle.

Took mine out for a spin and used the Nav and wondered why it kept trying to take me on all these different routes and kept me off the interstate as much as possible when the route I was going was right on the interstate. Turns out my nav setting were set to "winding" so took me on an...

Yes, I somehow managed to turn off my lights and chirp with the GS-911. Got the flashing lights back, but cant figure out how to get the chirp back.

yes

Everyone will have their opinion on this, but PREMIUM ONLY for me and mine. BMW bikes/cars require 91+ octane and I have always used premium only since 1987 with my first VW. That goes for Mercedes, Audi & Porche also. Over the years I have had friends that did not follow that and would use...

I took the harness holder off and put it up for safe keeping will eventually put the original seat back on once I get it upholstered, The shop that does my upholstery work is backed up so, big delay on my project. And I just moved the wires around the best I could to get them out the way. If...

Yes/No..... Mount points are the same but there is a big wire harness holder and all the wires you have to re-route. Plus the seat is not heated. I was not aware of all of this when I purchased the Mustang Day rider when I first purchased my R18B. So yes you can make it work but it is not...

OK my bad I see now a different font

Those are the original ones from the bike, Looks like the original owner of the box replaced the ones on the bike with the copper ones and sold the box.

A/C?? Where do I sign up for that? Riding BMW bikes since 2016 so I have come accustomed to heated seats and grips. Once you give me cake you cant go taking it away and not expect complaints. :ROFLMAO: But in all actuality when it does get those few cold days I just ride the K1600, more leg...

There should be an easy way to do it, since that is a B model they have it pictured on. Either they just stripped the wires and took the picture or tucked them between the 2 side panels. I did not spend a lot of time trying to figure out how to reroute them because I was not happy to loose my...

Yeah I had a 2016 K1600GTL first and no way wanted to get rid of it, but kept my eye on the R18B until I took my wife out to to test ride the R18B and she said I could get it and keep the K1600..... Nothing but smiles and found a R18B a few days later before she changed her mind 🤣 🤣

I was using the charger all the time, but constantly taking my iphone out of the otterbox case kept tearing them up so I stopped a few weeks ago after my second case replacement. But I did love that there is a fan in there, kept my phone cool and usable. Due to the heat here in Alabama, most...

Shocks upgrade??? Please share....

5000 Euro sounds like only the exhaust.... But even the plastic parts add up very quickly. I had to stop getting them once my wife caught wind to my R18 spending 🤣

Yeah I have them sitting in the case, just too lazy to put them on. Scared to mess them up, then scared to do them the proper way 🤣

Couple ways of doing this and most will be quite EXPENSIVE!!! I have taken this route myself and the cheap route is for all the small metal parts, buy at small countertop convection oven and a cheap powder coating gun and powder coat the parts yourself. For the plastic parts order from the R18...

I ordered all of the Roland Sands machined parts to include the brake/clutch levers, bar ends, mirrors, valve covers and breast plate. I did the install of all the parts with the exception of the breast plate. For that I took it to the dealer, because you do have to remove the frame rails on...

Maybe I should have asked when I attempted this.... I was never able to figure it out. Wish I would have heard of the flat head screw driver trick back then.