Search results

Somewhere on this site is a manual for accessory installation. Do a search then find the part you want to install.

Max BMW parts microfiche: https://shop.maxbmw.com/fiche/partsfiche.aspx. Go to the link and pick your bike.

Might have better luck buying a replacement. Doesn’t seem too pricey at $158.

Yes to thread locker or maybe crazy glue on my fork caps. I really struggled getting them off. As far as getting them back on, there was no way for me to get them started by hand. I couldn’t even come close. I did use 20wt oil so maybe that made the difference. Thanks for the update.

So what the word on the Wilburs springs? You got me thinking about it. Also I’m stealing your fork press idea.

Dealer checked my valves at 6k and made some adjustments. I did my own at 12k and did some adjustments as well. I wouldn’t trust the shop that disregards OEM service schedule. On the off chance something goes bad with the motor, BMW will ask if all the service was completed per requirements and...

That’s probably not O-ring leak. Get to the dealer and have it warranted.

I agree; while the B and TC are nice, I'm not a fan of the fairings. I think the Classic or Roc with a windshield is the way to go. Same for me as far as the Road King over the Street and Road Glides. I like the hard bags on the Roc and no speakers, which IMO is a waste since Bluetooth helmet...

Was looking to upgrade the tank on my Classic but without my own fab shop it’s a lot of work and money for essentially a 50-80 more miles. I’ll upgrade the suspension i stead. Thx for the reply and let me know how the tank upgrade goes. Very curious.

Very nice. Was looking at getting a Roctane over a Road King but the lack of windshield put me off. Can you see the headlight mounted speedo with the Classic windshield?

Very clever, well done.

My special fork cap compression tool was my son pushing down on a 2x4 while I screwed the tube into the cap. Worked well and didn’t take too much effort. If you come up with a solo method let us/me know so I can try it next time. I’m sure it’s more of a struggle to get a teenager out of bed to...

I had the same issue with some cheap Harbor Freight snap ring pliers. Went to a mechanic friend of mine and using his high quality snap-on tools the ring was removed quickly albeit not easily. As a plus my cheap snap ring pliers also corroded in the gulf south humidity within a month.

You can also try Bel-Ray fork oil available at Cycle Gear for $17 per liter. It’s just as good as OEM and comes in various weights.

They quoted me more to replace the seals. 4 hrs labor at $185/hr plus parts. Was looking at probably $1200 with all taxes and fees. Non BMW shops were quoting $350-$500 with me bringing them the forks, parts and oil; i.e. me taking them off and reinstalling.

Sharing tips in case anyone else tackles this so you can learn from my mistakes. My 2022 Classic right fork seal was leaking. Having 2 kids in college ($$$$) I decided to save $500 and replace them myself. Tools and supplies needed: 24mm crowfoot wrench and breaker bar - to remove the actual cap...

Ended up using 120mm. 100mm is based on the TC which has a much heavier front end due to fairing and all. Also used Bel-Ray fork oil at 20 wt. So far so good, very nice ride and it eliminated front end dive when braking hard.

thank you kind sir; appreciate the pfd. where perchance can one find the manual for future reference? also, i like what you've done to your bike and have a merry xmas.

Anyone know the air gap for the front fork? All I can find is 120mm but that's after installing the Wilburs fork spring replacement. Tackling a leaky fork seal and looking to save the $500 most shops want ...... kids and Christmas and all that.

Anyone find more economical solutions to the gasket kit? I have a fork seal leak and just spent $220 on both sets. Seems like highway robbery when typical seals from All-Balls run about $50 for the sets. BTW… using Bel-Ray fork oil at 20w - $18 per liter vice BMW’s $55 and I think it’s the same...